- Infant Skin Temperature Probes
-
High Quality Reusable Infant Skin Temperature Probes and Sensors forInfant Temperature Monitoring in OP - ICU - PediatricsThe D-S10 Series Infant Skin Temperature Probes and sensors are designed for measurement onthorax, axilla and extremities of infants in OP - ICU - PediatricsThe probes are available for all brands of modern patient monitors
- Product description
Connectors
As standard available with the type A, JK, HP and SA. - Other connector types are available upon request.
- Cables
3 mm black medical grade silicone tubing, with free inner shielded cable reinforced by Kevlar cores.- The primary standard length 2,75 m - Secondary standards 1,5 m and 4,5 m. Other lengths are available upon request.
- Electrode
Solid stainless steel house ø10 x 3,6mm. The sensor chip is placed in the center of the disk giving an optimized- thermal surface contact and a minimum influence from ambience.
- Measuring reference
2,252 kohms at 25ºC.
Measuring accuracy
0...25ºC ±0,2ºC
25...50ºC ±0,1ºCSelf heating
<0,01ºC/100µW
Insulation
Biological saline solution minimum. 2,1kVp 50Hz - Defibrillation proof 5kVp.
Use and Maintenance
The temperature probe can be cleaned with ordinary detergents either by wiping it clean with a soft cloth or machine washingat e.g. 80ºC ~ 176ºF.
Disinfecting
Without changing the features of the soft and smooth structure, the probes are accepting all generally applied hospital disinfectantssuch as ethanol, isopropyl alcohol or chlorite compounds.
Typical examples
Disinfect the cleaned probe with a disinfectant such as
A. Rodalon™, Cidex™.
B. 1 - 2,5% Formaldehyde solution.
C. 70% Alcohol, 0,5% Chlorexidine, 29,5% H2O
Steam sterilization
A, SA and HP-types can be autoclaved at 121ºC - 250ºF in standard cycles of 20 min.Standards
EN12470-4, EN60601-1, EN10993
CE-marking
Approved in Class IIb to Council Directive 93/42/EEC Annex II, section 3.2
Full quality assurance system EN ISO 9001 and EN ISO13485
- EXACON™
