- Oral & Nasal Temperature Probes
- High Quality Reusable Oral Temperature Probes & Nasal Temperature Probes and SensorsWith Ultra Fast Response Time - Flexible Teflon Electrode With Small DiameterThe D-F1310 Series Oral and Nasal Temperature Probes and Sensors are designed for a large varietyof applications, like fast oral temperature registration in emergency room and for long termnasal temperature measurements in OP, ICU and Pediatrics.The Oral and Nasal Temperature Probes and Sensors are available for all brands of modern patient monitors
- Product description
Connectors
As standard available with the type A, JK, HP and SA. - Other connector types are available upon request.
- Cables
3 mm black medical grade silicone tubing, with free inner shielded cable.- The primary standard length 2,75 m - Secondary standards 1,5 m and 4,5 m. Other lengths are available upon request.
- Electrode
The white colored flexible plastic catheter has a nom. ø1,2 mm and length 100mm.- The sensor chip is placed in the very tip with a nominal outside diameter of 1,3 mm.
- Measuring reference
2,252 kohms at 25ºC.
Measuring accuracy
0...25ºC ±0,2ºC
25...50ºC ±0,1ºCSelf heating
<0,01ºC/60µW
Insulation
Biological saline solution minimum. 2,1kVp 50Hz.
Use and Maintenance
The temperature probe can be cleaned with ordinary detergents either by wiping it clean with a soft cloth or machine washingat e.g. 80ºC ~ 176ºF.
Disinfecting
Without changing the features of the soft and smooth structure, the probes are accepting all generally applied hospital disinfectantssuch as ethanol, isopropyl alcohol or chlorite compounds.
Typical examples
Disinfect the cleaned probe with a disinfectant such as
A. Rodalon™, Cidex™.
B. 1 - 2,5% Formaldehyde solution.
C. 70% Alcohol, 0,5% Chlorexidine, 29,5% H2O
Steam sterilization
A, SA and HP-types upon requestStandards
EN12470-4, EN60601-1.
CE-marking
Approved in Class IIb to Council Directive 93/42/EEC Annex II, section 3.2
Full quality assurance system EN ISO 9001 and EN ISO13485
- EXACON™
